Chapter 4 Wiring
The device supports connecting to the RS-485 terminal, the door lock, and the exit button. You can
wire the peripherals according to the descriptions below.
Note
• If the cable size is 18 AWG, you should use a 12 V switched-mode power supply. And the
distance between the power supply and the device should be no more than 20 m.
• If the cable size is 15 AWG, you should use a 12 V switched-mode power supply. And the
distance between the power supply and the device should be no more than 30 m.
• If the cable size is 12 AWG, you should use a 12 V switched-mode power supply. And the
distance between the power supply and the device should be no more than 40 m.
4.1 Description of Interface and Tag
Figure 4-1 Wiring Interface
Note
You can find the description of tag 2 and 4 in Wire Device .
DS-K5604A-3XF Series Face Recognition Terminal User Manual
6
