6. Look at the camera.
Note
• Make sure your face picture is in the face picture outline when adding the face picture.
• Make sure the captured face picture is in good quality and is accurate.
• For details about the instructions of adding face pictures, see Tips When Collecting/
After completely adding the face picture, a captured face picture will be displayed at the upper
right corner of the page.
7. Tap Save to save the face picture.
8. Optional: Tap Try Again and adjust your face position to add the face picture again.
9. Set the user role.
Administrator
The user is the administrator. Except for the normal attendance function, the user can also
enter the Home page to operate after authenticating the permission.
Normal User
The User is the normal user. The user can only authenticate or take attendance on the initial
page.
10. Tap to save the settings.
7.3.3 Add Card
Add a card for the user and the user can authenticate via the added card.
Steps
1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in
the backend.
2. Tap User → + to enter the Add User page.
3. Connect an external card reader according to the wiring diagram.
4. Tap the Employee ID. field and edit the employee ID.
Note
• The employee ID should be less than 32 characters. And it can be a combination of lower
letters, upper letters, and numbers.
• The employee ID should not be duplicated.
5. Tap the Name field and input the user name on the soft keyboard.
DS-K5604A-3XF Series Face Recognition Terminal User Manual
31
