Note
The input certificate ID cannot be the same as the existing ones.
3. Upload a certificate file from the local.
4. Click Install.
8.5.10 Change Administrator's Password
Steps
1. Click Configuration → User Management .
2. Click .
3. Enter the old password and create a new password.
4. Confirm the new password.
5. Click OK.
Caution
The password strength of the device can be automatically checked. We highly recommend you
change the password of your own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the password monthly
or weekly can better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
8.5.11 View Device Arming/Disarming Information
View device arming type and arming IP address.
Go to Configuration → Arming/Disarming Information .
You can view the device arming/disarming information. Click Refresh to refresh the page.
8.5.12 Network Settings
Set TCP/IP, port, Wi-Fi, report strategy, platform access and HTTP listening.
Set Basic Network Parameters
Click Configuration → Network → Basic Settings → TCP/IP .
DS-K5604A-3XF Series Face Recognition Terminal User Manual
63
