Parameter
Description
Temperature Compensation
If the measured temperature is higher/lower than the actual
object's temperature, you can set the compensation
temperature here. Available range: -99 °C to 99 °C
Door Not Open When
Temperature is Abnormal
When enabling the function, the door will not open when the
detected temperature is higher or lower than the configured
temperature threshold. By default, the function is enabled.
Temperature Measurement
Only
When enabling the function, the device will not authenticate the
permissions, but only take the temperature. When disabling the
function, the device will authenticate the permissions and at the
same time take the temperature.
Unit
Select a temperature unit according to your preference.
7.5 Data Management
You can delete data, import data, and export data.
7.5.1 Delete Data
Delete user data.
On the Home page, tap Data → Delete Data → User Data . All user data added in the device will be
deleted.
7.5.2 Import Data
Steps
1. Plug a USB flash drive in the device.
2. On the Home page, tap Data → Import Data .
3. Tap User Data or Face Data.
4. Enter the created password when you exported the data. If you do not create a password when
you exported the data, leave a blank in the input box and tap OK immediately.
Note
• If you want to transfer all user information from one device (Device A) to another (Device B),
you should export the information from Device A to the USB flash drive and then import from
the USB flash drive to Device B. In this case, you should import the user data before importing
the profile photo.
• The supported USB flash drive format is FAT32.
DS-K5604A-3XF Series Face Recognition Terminal User Manual
36
