7.10.2 Set Manual Attendance via Device
Set the attendance mode as manual, and you should select a status manually when you take
attendance.
Before You Start
Add at least one user, and set the user's authentication mode. For details, see User Management.
Steps
1. Tap T&A Status to enter the T&A Status page.
2. Set the Attendance Mode as Manual.
Figure 7-14 Manual Attendance Mode
3. Enable the Attendance Status Required.
4. Enable a group of attendance status.
Note
The Attendance Property will not be changed.
5. Optional: Select an status and change its name if required.
The name will be displayed on the T & A Status page and the authentication result page.
Result
You should select an attendance status manually after authentication.
DS-K5604A-3XF Series Face Recognition Terminal User Manual
45
