Figure 7-5 Wi-Fi Settings
3. Enable the Wi-Fi function.
4. Configure the Wi-Fi parameters.
-
Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK.
-
If the target Wi-Fi is not in the list,tap Add Wi-Fi. Enter the Wi-Fi's name and password. And
tap OK.
Note
Only digits, letters, and special characters are allowed in the password.
5. Set the Wi-Fi's parameters.
-
By default, DHCP is enable. The system will allocate the IP address, the subnet mask, and the
gateway automatically.
-
If disable DHCP, you should enter the IP address, the subnet mask, and the gateway
manually.
DS-K5604A-3XF Series Face Recognition Terminal User Manual
26
