HIKVISION DS-7204HQI-K1 User Manual Download Page 160

Page: 160 / 200

DS-72xxHUI-Kx, DS-72xxHQI-Kx Digital Video Recorder (DVR) User Manual

158

UM DS-72xxHUI-Kx, DS-72xxHQI-Kx 062817NA

Select the IP SAN disk from the list.

Click

to add the selected IP SAN disk.

Up to eight IP SAN disks can be added.

Figure 205, Add IP SAN Disk

After having successfully added the NAS or IP SAN disk, return to the HDD Information menu. The
added NetHDD will be displayed in the list.

If the added NetHDD is uninitialized, select it and click the

Init

button for initialization.

Figure 206, Initialize Added NetHDD

12.3

Managing HDD Groups

12.3.1

Setting HDD Groups

Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a
particular HDD group through HDD settings.

Enter the Storage Mode interface, Menu > HDD > Advanced.

Set the

Mode

to Group, as shown in 0.

Summary of Contents for DS-7204HQI-K1









































































































































































































Search results

Summary of Contents for DS-7204HQI-K1

Reviews:

Related manuals for DS-7204HQI-K1

Brands by name

Popular brands

HIKVISION DS-7204HQI-K1, User Manual

Search results

Summary of Contents for DS-7204HQI-K1

Reviews:

Related manuals for DS-7204HQI-K1

Brands by name

Popular brands