High End Systems intellaspot XT-1, User Manual

Page: 21 / 98

intellaspot TM XT-1 User Manual 7
Chapter 2:
Setup and Configuration
Installation of your intellaspot XT-1 fixture includes mounting, connecting
to power and DMX linking and configuration.
Use the following steps to set up and configure your fixture:
1. Unpack the fixture.
2. Install power cord cap for your location.
3. Mount the fixture upright or suspended from a standard truss.
4. Connect the fixture to a DMX controller via DMX cabling.
5. Configure the fixture for DMX control using the battery mode or after connecting
to power.
Unpacking the Fixture
The intellaspot XT-1 fixture ships in a box or an optional road case specifically designed to
protect the product during transport. When unpacking, inspect the fixture for physical damage
to components. High End Systems
®
assumes no responsibility for products that are damaged
during transport. Return a product for repair in its road case.
Before sending anything to the factory, call your High End Systems dealer/distributor
for a Return Material Authorization (RMA) number. The factory cannot accept any
goods shipped without an RMA number.
Pan and Tilt Locking
The intellaspot XT-1 fixture ships with pan and tilt latches locked. You can unlock/adjust these
latches to stabilize the fixture for mounting.
Note: Disengage Pan and Tilt locks before operating the fixture.
Pan Lock
Tilt Lock