High End Systems intellaspot XT-1, User Manual

Page: 22 / 98

CHAPTER 2
Setup and Configuration
8 intellaspot TM XT-1 User Manual
Installing a Power Cord Cap
The custom power cord for intellaspot XT-1 fixtures ships without a power cord cap. Use the
information in this section to install the correct power cord cap for your location.
Because of the variety of power cord caps used worldwide, High End Systems, Inc. cannot make
specific recommendations for the power cord cap. Contact a local authority for the type of
power cord cap needed. When installing the power cord cap, note that the cores in the mains
lead are colored according to the following code:
• green and yellow = earth
• blue = neutral
• brown = live
Installing a Line Cord Cap - U.K. Only
In the United Kingdom, core colours in the mains lead of this equipment may not correspond
with the colored markings identifying the terminals in the fixture’s plug. In that case, install a
line cord cap in accordance with the following code:
• Connect the green and yellow core to the plug terminal marked with the letter “E,” or by
the earth symbol or coloured green, or green and yellow.
• Connect the blue core to the terminal marked with the letter “N” or coloured black.
• Connect the brown core to the terminal marked with the letter “L” or coloured red.
Vatic Fitter Heads Information - Danmark
Advarsel: Beskyttelse mod elektrisk chock.
Vigtigt!
Lederne med gul/groen isolation maa kun tilsluttes en klemme maerket
WARNING:
Class 1 equipment - This equipment must be earthed.
eller