High End Systems intellaspot XT-1, User Manual

Page: 42 / 98

CHAPTER 3
Menu System
28 intellaspot TM XT-1 User Manual
Pan/Tilt Swap
This option swaps the pan motor and tilt motor operation
to coordinate movements between fixtures on a link
mounted perpendicular to each other.
To swap Pan and Tilt:
1. Navigate to and select the
Set Parameters Menu
,
(see Set Parameters Menu on page 27).
2. Using the left and right arrows on the Center button, scroll
to
Pan/Tilt Swap
. The current state (
Enabled
or
Disabled
)
will be displayed.
3. Use the up and down arrows on the Center button to scroll to
Enabled
to swap pan and tilt or
Disabled
to restore default
setting and press the Enter button to select.
Pan Invert
This menu option inverts the direction of
the pan motor to coordinate movements
between fixtures mounted opposite each
other horizontally.
To invert the fixture’s Pan motion:
1. Navigate to and select the
Set Parameters Menu
(see Set Parameters Menu on page 27).
2. Using the left and right arrows on the Center button, scroll to
Pan invert
. The current state
(
Enabled
or
Disabled
) will be displayed.
3. Use the up and down arrows on the Center button to scroll to
Enabled
to
invert Pan movement or
Disabled
to restore default setting and press the
Enter button to select.
Tilt Invert
This menu option inverts the direction of the tilt motor to coordinate movements
between fixtures on a link facing each other vertically.
To invert the fixture’s Tilt motion:
1. Navigate to and select the
Set Parameters Menu
(see Set Parameters Menu
on page 27).
2. Using the left and right arrows on the Center button, scroll to
Tilt Invert
.
The current state (
Enabled
or
Disabled
) will be displayed.
3. Use the up and down arrows on the Center button to scroll to
Enabled
to
invert Tilt movement or
Disabled
to restore default setting and press the
Enter button to select.