High End Systems intellaspot XT-1, User Manual

Page: 70 / 98

CHAPTER 4
Fixture Programming
56 intellaspot TM XT-1 User Manual
Macro
Internal Effects™ macros are factory-programmed sequences which allow complicated looks in
one scene. Each Internal Effects™ macro modifies a specific set of parameters, while allowing user
control of all other parameters in the scene. The four Internal Effects macros available on a
standard configuration intellaspot XT-1 fixture are Pan Sweep, Tilt Sweep, Clockwise Circle and
Counterclockwise Circle.
The value set in the Macro parameter determines the size of each of the movements. The
MSpeed channel determines the speed. With the MSpeed set between DMX 5-255 all internal
effects complete movement at the selected MSpeed time (up to 25 seconds). An MSpeed DMX
value less than 4 uses the default time of 2.5 seconds to provide a pleasing look when the
additional variation given by using the MSpeed channel is not required.
Macro Parameter Setting Description
Macro Off Disables the currently playing macro
Pan Sweep Moves the light beam back and forth through the 540° pan range
Tilt Sweep Moves the light beam back and forth through the 270° tilt range
Clockwise circle Moves the light beam in a series of clockwise circles from small to large.
Counterclockwise circle
Moves the light beam in a series of counterclockwise circles from small
to large.