High End Systems intellaspot XT-1, User Manual

Page: 39 / 98

CHAPTER 3
Menu System
intellaspot TM XT-1 User Manual 25
Menu System Options
The following sections describe and give examples for selecting and/or setting available fixture
configuration options.
Address Menu
Address is the top level menu selection used to set the fixture’s DMX start channel. You can
address the fixture before applying power in the battery mode or in normal mode after you power
up the fixture.
Note: The last valid Start channel for an intellaspot fixture is 474 (512–39+1).
Setting a Start Channel in Battery Mode
1. Unlock the menu system in battery mode by pressing
and holding the MENU and ENTER buttons at the same
time. The display will show
Set DMX Start Channel:
###
with the current fixture start channel and the
unit’s fixture and display software versions.
1. Note: The current fixture and display software is
available for verification and download from
highend.com.
2. Use the UP and DOWN arrow buttons on the Navigation button to select a valid DMX start
channel. The display will flash a new option ready for selection.
3. Press the ENTER button to accept the new DMX Start channel. The display will stop flashing
when a new option is entered. The new address will not be stored until the ENTER
button is pressed .
Setting a Start Channel in Normal Mode
1. After powering on the fixture, unlock the menu by
pressing and holding down the MENU button until the
extended 2-line display appears.
DMX Address Menu
is
the first option at the top menu level.
2. Press the ENTER button to select. The display will
show
Set DMX Start Channel:###
with the start
channel that is currently assigned to the fixture.
3. Use the UP and DOWN arrow buttons on the
Navigation button to select a valid DMX start channel from 1-474. The display will flash a new
option ready for selection.
4. Press the ENTER button to accept the new DMX Start channel. The display will stop flashing
when a new option is entered. The new address will not be stored until the ENTER
button is pressed .
Set DMX Start
Channel: 001
S/W: v1.3.235
Display: v1.1.0
Set DMX Start
Channel: 000