CHAPTER 4
Fixture Programming
intellaspot
TM
XT-1 User Manual
43
MSpeed values control the pan and tilt motion for intellaspot XT-1 fixtures by default, see
MSpeed
(Motor Speed)
on page 55. To control the Pan and Tilt parameters with DMX controller
crossfading, set Pan/Tilt MSpeed off in the Control parameter (see
Control
on page 57).
Note:
Optical encoders for pan and tilt instantly correct the fixture’s position if the
fixture is jarred from its programmed position. If a physical obstruction
prevents the fixture from correcting its position, the fixture “times out” to
prevent wear on the motors. If the fixture has timed out, remove the
obstruction and home the fixture to return it to normal operation.
Color Parameters
CMY color mixing is achieved using three color wheels (Cyan, Magenta, and Yellow). A CTO wheel
lets you adjust color temperature. A fixed color wheel provides an additional five factory selected
dichroic color wedge filters.
Color Mix Function
This parameter determines how the cyan, magenta, and yellow color wheels move. The Color
Function values can be enabled in either full speed (controller crossfading the wheel positions), or
MSpeed (MSpeed control of the wheel motor). For more information on MSpeed, see
MSpeed
(Motor Speed)
on page 55.
Color
Function
Description
Pure Mix
Allows color wheel movement from open (white) to saturated color (permits a smaller
“step” between color wheel positions for color crossfades).
Continuous
Allows exact positioning of the color wheel from white to full color to white over the full
revolution of the wheel. Using this feature allows you to split the light beam into two
distinct colors.
Spin
Puts all three (cyan, magenta, and yellow) color wheels in spin mode. Wheel Spin
speed, direction, or fixed position can be set individually on CMY channels.
Cycle
Uses only the color-mixing portion of the cyan, magenta, and yellow color wheels to
cycle colors from red to green to blue at variable speeds (rate set by cyan DMX
channel).
Random
Performs a pseudo-random color chase of 12 factory-selected colors using the cyan,
magenta, and yellow color wheels at variable speeds (rate set by cyan DMX channel).
Blink
Closes then reopens the shutter between indexed color changes.
Summary of Contents for intellaspot XT-1
