High End Systems intellaspot XT-1, User Manual

Page: 78 / 98

CHAPTER 5
General Maintenance and Troubleshooting
64 intellaspot TM XT-1 User Manual
Replacing Interchangeable Motor Driver Boards
The intellaspot XT-1 fixture is designed with two basic types of motor driver boards:
1. Interchangeable 2-phase boards drive the motors for each of the user-configured modules,
and the Focus/Frost/Zoom functions.
2. Interchangeable 3-phase pan and tilt driver boards.
A driver board is interchangeable with other boards of its type. The position of a board’s standoffs
and contact screw determine the board addressing.
When replacing a board, observe the following warnings.
Locating 2-Phase Motor Driver Boards
Four 2-phase boards control the motors for all Color wheels, Soft Edge Flags, Gobo Indexing and
Rotation as well as Zoom, Focus and Iris functions.
CAUTION: The fixture will not function correctly if contact screws are
missing from driver boards.
WARNING! To avoid electrical shock, disconnect power before servicing.
Equipment surfaces may reach temperatures up to 130° C (266° F).
Allow the fixture to cool before handling.
Board 1: Animate/Animate Rot/Prism FX/Prism FX Rot
Board 2: Shutter/Cyan/CTO/Soft Edge
Board 3: Shutter/Magenta/Yellow/Color
Board 4: Gobo 1, Gobo 1 Rotation/Gobo 2/Gobo 2 Rotation
Board 8: Focus/Zoom/Iris
1
2
3
4
8