High End Systems intellaspot XT-1, User Manual

Page: 41 / 98

CHAPTER 3
Menu System
intellaspot TM XT-1 User Manual 27
Set Parameters Menu
The Set Parameters menu lets you configure your
fixture’s motion, display, lamp, and data source settings.
To enter the set menu:
1. Press the Menu button to unlock the menu system
or to move back up the system to the top level
menus.
2. Using the left and right arrows on the Center
button, scroll through the top level to
Set
Parameters Menu
and press the Enter button to
select. The screen will display the SET icon in the
screen banner and the first option of the next menu
level.
Factory Default Settings
This option lets you return all factory options to their
default settings or changes the factory options
individually.
An intellaspot XT-1 fixture ships with the following factory default settings:
If any of the default settings are changed, this menu reverts to the
Off
option. The
On
option
restores all factory defaults.
To check and reset factory defaults:
1. Navigate to and select the
Set Parameters Menu
as shown above.
Factory Default
Settings
is the first option in the next Menu level with the current state.
On
is the default
and
Off
indicates that a factory default has been changed.
2. Press the Enter button to select.
3. To reinstate the factory defaults if
Off
is displayed, use the up and down arrows on the
Center button to scroll to
ON
and press the Enter button to select. All settings will be
restored to their factory default setting.
Pan Tilt Swap =
Disabled
Tilt Invert =
Disabled
Lamp Life Limit =
Disabled
Pan Invert =
Disabled
Display Level =
On
Data Loss Timeout =
Short
Data Source =
DMX
Lamp Strike Mode =
Auto
LED Level = On
Factory Default Se
DMX
[ ]
Factory Default
DMX
[ ]
Set Parameters
Settings: On
Menu