12. Install the enclosure cover.
a) Seat the cover into place over the enclosure by placing the cover on the chassis and sliding it towards
the front of the enclosure.
b) Once the cover is seated, press the cover latch down until it locks.
Figure 121: Locking the Enclosure Cover
13. Slide the enclosure into the rack.
a) Pull the rack mounted rails out towards the front of the rack until they are locked in place.
Figure 122: Rack Mounted Rails Locked
b) Line up the enclosure with the rack mounted rails and slide it in until the first set of locks engage.
96
3
Part Replacement
User Guide
3.7
CPU and Heat Sink Module Replacement
