a) Pull connector tabs outward with even pressure until the DIMM pops out of the connector.
Figure 197: Connector Tabs
b) Carefully remove the DIMM from the slot.
Figure 198: Removing the DIMM
19. Repeat the previous step to uninstall all of the DIMMs from the enclosure.
20. Identify the location of the DIMM slots on the new enclosure. Ensure that the DIMM is installed in the
same locations as the failed enclosure.
21. Install the DIMM.
a) Slide the DIMM into the correct DIMM slot and carefully press down until seated.
Figure 199: Removing the DIMM
142
3
Part Replacement
User Guide
3.10
Chassis Replacement
