The Dashboard Control Panel page will appear.
Figure 155: Dashboard Control Panel
c) Review the Dashboard Control Panel to identify the failed M.2.
2.
Locate/verify the enclosure.
a) In the Web UI, click Server Identify.
The Dashboard Server Identify page will appear.
b) In the Identify Actions section, select UID LED ON and set the Server Identify Timeout.
Figure 156: Server Identify
c) Click Perform Action.
The Server Identification LED will illuminate to indicate that it is the enclosure being accessed.
3.
Power Off the enclosure.
a) In the Web UI, click Power Control.
117
3
Part Replacement
User Guide
3.9
M.2 Replacement
