c) Insert the connectors into the rail connections on either side as seen in the image below.
Figure 58: CMA Installation
d) Slowly slide the enclosure forward to ensure the CMA arm is operating properly and return it back to
its proper location.
14. Cable the CMA.
a) Unlatch the elbow side of the CMA arm and swing it forward by pressing the blue button that says
“push” to unlatch it and swing it out.
b) Gather the cables, two power cables and one Ethernet cable to install in this right hand side.
c) Open all of the baskets.
Figure 59: Open Baskets
59
3
Part Replacement
User Guide
3.4
Rails Replacement
