2.
4.4.2.3
Checking Enclosure Sensors using IPMIutil
1. Launch a Command Prompt by clicking Start > Command Prompt.
The IPMIutil Terminal will appear.
2. Check the status of the enclosure sensors by issuing the command ipmiutil sensor -N <IP ADDRESS>
-U <USERNAME> -P <PASSWORD>.
The status of the enclosure sensors will be displayed.
Figure 293: Enclosure Sensors
4.4.2.4
Viewing System Logs and Reports using IPMIutil
1. Launch a Command Prompt by clicking Start > Command Prompt.
The IPMIutil Terminal will appear.
2. View the system event logs and reports by issuing the command ipmiutil sel –N <IP ADDRESS> –U
<USERNAME> –P <PASSWORD>.
199
4
System Management
User Guide
4.4
IPMI Overview
