c) Click OK.
The enclosure will Power Off.
Figure 182: Power Off
4.
Place the CMA into the service position.
a) Unlatch the CMA at the elbow connector by pressing the blue release button to unlatch the connector
from the rail.
b) Swing the CMA away from the enclosure.
c) The arm should be extended away from the enclosure as shown in the following example.
Figure 183: CMA in service position
5.
From the rear of the enclosure, disconnect the all of the cables attached to the enclosure.
a) Remove the 10G SFP+ cable from the NIC port (1).
b) Remove the Ethernet cable from the enclosure (2).
132
3
Part Replacement
User Guide
3.10
Chassis Replacement
