c) On either side of the enclosure rails, pull the blue release tabs and push the enclosure into the rack.
The enclosure latches will engage with the rail latch when properly seated.
Figure 80: Blue Tabs
Figure 81: Enclosure Installed
13. Connect the CMA to the enclosure.
a) Move the CMA arm inward towards the enclosure.
b) Connect the CMA arm by pressing the CMA bracket into the rail connection.
14. Connect the power cords and cables to the enclosure.
a) Connect the 10G SFP+ cable from the NIC port (1).
b) Connect the Ethernet cable from the enclosure (2).
71
3
Part Replacement
User Guide
3.5
DIMM Replacement
