Herz pelletstar 10, Operating Instructions Manual

Page: 88 / 96

9 Fault reports and their correction
88 Betriebsanleitung_PS_10_60_Touch_Englisch_V1.3
9.2 Maintenance schedule (Customer inspection)
(Some points have also been prescribed in accordance with TGPF H 118!)
For safety reasons, maintenance must only be carried out with the main
switch turned off. However first of all, the system must be switched off by
means of the On/Off button and you must wait for the burnout phase. If you
have to climb into the storage tank or bunker, always make sure that there
is a second person available to supervise you. Potential carbon monoxide
enrichment may put your life in danger.
Interval Part of the system Activity
Weekly Entire unit
The whole boiler system including the fuel store
must be visually inspected
Every 4
– 10
weeks
Ash
Fly ash, combustion chamber and ash pans are to
be cleaned or emptied (if necessary).
After you have removed the fly ash pan, clean the
fly ash area (using a vacuum cleaner and broom)
Every 4 weeks
Operation of the controller
Switch the controller on and off, make sure that it
is working properly
Fault messages Check: Faults must also be displayed
Combustion air fan, induced-draught
fans
Check: Fans must be work properly when the
boiler is in operation
Combustion chamber
Check the combustion chamber and clean if
required
Fire-extinguishers
Check: Equipment must be reliable (heed the
valid national regulations)
Ash storage Check: Correct storage
Boiler room No flammable materials must be present.
Fire doors
Must be in a good state of repair (e.g. fire doors
must close automatically
Gear motor Check: visual inspection for oil leaks
At least all 3
months
Light barrier system Check light barrier system and clean if necessary
Annually
Gear oil levels Check and top up if necessary
Induced-draught fan Disassembly and clean
Burn back protection device Check for tightness
Every 2 years Storage room
Empty the storage room completely and clean it
out
Every 3 years
Boiler system
Maintenance must be carried out on the boiler
system (<150 kW) by the system installer.
Gear oil Change the gear oil