Herz pelletstar 10, Operating Instructions Manual

Page: 70 / 96

8 Terms and definitions
70 Betriebsanleitung_PS_10_60_Touch_Englisch_V1.3
Position Term
Display- /
Setting value
Description
Figure 7.49
Room must temperature
Setting value
Desired room temperature during heating
time. This setting is only used in
connection with the remote room adjuster
(FBR 1). The difference between the
room must temperature and the actual
room temperature combined with the
room influence is taken into account in
the calculated flow fixed temperature.
Example:
Room must temperature: 22°C
Actual room temperature: 20°C
Room influence: 5
Difference between room must
temperature
– actual room temperature
= 2 K
This difference is multiplied by the room
influence: 2Kx5 =10 K
I. e. 10 K will be added to the calculated
feed flow temperature.
If the actual room temperature is higher
than the target room temperature, the
calculated value will be deducted.
Kneeling temperature
Setting value
Desired room temperature during
lowering time. The difference between
the room must temperature and the
kneeling temperature combined with the
kneeling influence is taken into account in
the
calculated feed flow target
temperature.
Example:
Room must temperature: 22°C
Actual room temperature: 18°C
Kneeling influence: 5
Difference between room must
temperature and kneeling temperature =
4 K
This difference is multiplied by the
kneeling influence:
4Kx5 = 20K
I.e. 20 K will be deducted from the
calculated feed flow target temperature
during the lowering time.
In addition, if there is a remote room
adjuster (FBR 1) the difference between
the kneeling temp. and the actual room
temperature multiplied by the room
influence is taken into account.
Flow fixed temperature
Setting value
Flow fixed temperature to be maintained
constantly during the set heating time.
For the operating mode feed flow fixed.