Herz pelletstar 10, Operating Instructions Manual

Page: 58 / 96

8 Terms and definitions
58 Betriebsanleitung_PS_10_60_Touch_Englisch_V1.3
8 TERMS AND DEFINITIONS
In this chapter all terms are explained which occur on the individual menu pictures. Under the figure a label
is included (Figure 7.19 to Figure 7.95
). The same label occurs in the chapter “Terms and definitions”.
Because of this a quick and easy find of the terms and definitions is ensured.
Some terms can be a display value and a setting value. To recognize these, they are
marked with a *.

The term is a display value when the aggregate test is inactive

the symbol of the
aggregate test is as followed:

If the aggregate test is active (by pressing the symbol the hand changes green
and the aggregate test gets activated) the individual components can be tested by
pressing the control lamp. Because of this the term is then a so-called setting value.
8.1 Boiler module
Position Term
Display- /
Setting value
Description
Figure 7.19
Boiler temperature
Display value
Display of the boiler temperature (=Flow
temperature) in °C
Back flow temperature
Display value
Display of the back flow temperature in
°C
Boiler power
Display value
Display of the current boiler output in %
Back flow mixer
Display value
Indication of the actual state
(OPEN/CLOSE) of the back flow mixer
Back flow pump
Display value
Indication of the actual state (ON/OFF) of
the back flow pump
Figure 7.20
Flue gas temperature
Display value
Display of the flue gas temperature in °C
Burning chamber
temperature
Display value
Display of the burning chamber
temperature (= temperature in the
combustion chamber) in °C
Stoker temperature
Display value
Display of the stoker screw temperature in
°C
ID Fan
Display value
Display of the actual value of the induced-
draught fan in %
Rotation speed
Display value
Display of the rotation speed of the
ventilator in %