Description of the menu navigation system and settings
7
Betriebsanleitung_PS_10_60_Touch_Englisch_V1.3
17
7.2
Main menu
After the starting process of the display, Figure 7.2 appears. In the middle of the screen important values for
boiler, buffer, hot water tank, heating circuit, and so on, are shown, which can be adapted individual (see
chapter 7.8).
Figure 7.2: Main menu
By touching the following button
the main menu will be displayed.
(see Figure 7.2)
fault messages (warnings & alarms) will be displayed.
(see Figure 7.16)
the individual modules (boiler, hot water tank, buffer, heating circuit, solar, Hydr.
compensator, net pump, zone valve, ext. demand) will be displayed.
(see Figure 7.17)
the menu settings (network configuration, E-Mail, screen saver) will be displayed.
(see Figure 7.96, visible only with code!)
you can set and modify date & time.
(see Figure 7.8, Modification only with code!)
you will be taken to the code entry screen.
(see Figure 7.4)
the heating system can be switched on/off.
(see Figure 7.6 and Figure 7.7)
In general the field is used to display the operating conditions, which are shown in
chapter 5.
you will be taken to the second page of the value overview on the main menu.
Summary of Contents for pelletstar 10
