Herz pelletstar 10, Operating Instructions Manual

Page: 21 / 96

Description of the menu navigation system and settings 7
Betriebsanleitung_PS_10_60_Touch_Englisch_V1.3 21
7.7 Selecting date and time
Navigation:  Navigation:  
Screen: Screen:
Figure 7.8: Selecting date and time Figure 7.9: General settings for NTP
By touching the following button: By touching the following button:
ENGLISH
you can select the language to be
used.
ENGLISH
you can select the language to be
used.
12:42:29 you can set the time. pool.ntp.org
you can enter the name of the
server. (The server gets from the
network an IP-address and can so
communicate with the network.)
25.04.2013 you can set the date. UTC+1 you can set the time zone.
you can activate NTP, which
means that the time and date will
be updated automatically.
(Is NTP active, time and date will
be updated automatically over the
network (=connection of the boiler
with the internet via LAN cable).
12
you can enter the update interval
in hours (Date and time can be
updated in the entered time
interval over the network, i. e. in
the case entered the time and
date will be updated every 12
hours.)
you can choose between summer
and winter time.
NTP Update
you can carry out an NTP update
(If you activate that update, time
and
date will be updated
immediately and you don’t have to
wait for the act. interval).
you can lock the screen.
the main menu will be displayed.
Note:
NTP (Network Time Protocol) is used to synchronize
date and time automatically over the network.
A valid network connection via a LAN cable and the
connection with the internet is required.
In case of power failure:
Is NTP activated, the date and time will be
automatically updated after the switching on of the
system.
Is NTP not activated, the date and time will be
updated over an internal memory up to days
(manufacturer’s data). Is the boiler more than 10
days out of service, date and time must be set
manually.