Heliocentris Energy Manager 1.3, Instruction Manual

Page: 41 / 78

Operating
Energy Manager 1.3 - Instruction Manual 41
5.1.5 Fuel Submenu
Menu item Display Description I/C
OpMode One of the
modes:
Operating mode of fuel
system. The mode is displayed
in the main menu if no error
occurred.
I
init Software module initializes I
active Tank is available and will be
used. I
offline Fuel module is offline and will
not be monitored by the EM
control software. I
standby Tank is available. I
error Fuel module is in error status. I
StateRpl One of the
replies: State reply. System answer on a
user command (CMD).
init Software module initializes I
run Fuel module reports “Ready for
operating”. I
offline Fuel module reports request to
switch as soon as possible to
“offline” in OpMode. I
CMD One of the
commands:
Command to be entered by
user.
no command No command in queue I+C
go online Start Fuel module C
go offline Stop Fuel module C
cancel command Cancel command in queue C
Level x.x % Filling status in % I
Content xxx L Filling status in liters I
Remain x.xx d Available remaining life at
current consumption in days I
Total cons xxxx L Total consumption since last
reset I
Reset Counters* Resetting operating counters C*
Error List Number in
hexadecimal
format All active events are displayed
one after another with their
number and a short text and
can be confirmed.
I+C
Legend:
*
Item is only displayed if the access level is service
I/C Information/Command
Table 5-5 Fuel submenu