Heliocentris Energy Manager 1.3, Instruction Manual

Page: 39 / 78

Operating
Energy Manager 1.3 - Instruction Manual 39
5.1.4 Battery Submenu (Batt)
Menu item Display Description I/C
OpMode 1 of the following
modes:
Operating mode of the battery.
The mode is displayed in the
main menu if no error
occurred.
init Software module initializes I
offline Battery is offline and will not be
monitored by EM control
software. I
error Error detected, battery cannot
run. I
blk charge Battery charges with fixed
current
I
flt charge Genset is running or site is
running on grid. Voltage is at
configured float voltage to
maintain voltage at floating
level (default: 54 V).
I
eboost ch. Battery charges with fixed
voltage.
I
discharge Battery is in discharge. I
eboost ch Battery is in extended boost
charge and will be charged
for10 h (time is set in LAA).
I
equali ch Battery is in equalization
charge and will be charged for
20 h (time is set in LAA).
I
v_sub_low Battery is not charged or
discharged and the voltage is
below the float voltage.
I
StateRpl One of the
replies: State reply. System answer to a
user command (CMD).
init SW initializes. I
run Battery module reports “Ready
for operating”.
I
offline Battery module reports request
to switch to offline operating
mode as soon as possible.
I
CMD One of the
commands: Command to be entered by a
user.
no command No command stands in a
queue.
I+C
go online Start battery module C
go offline Stop battery module C
cancel cmd Cancel command in queue. C
Voltage x.xx V Battery voltage I