Heliocentris Energy Manager 1.3, Instruction Manual

Page: 58 / 78

Decommissioning
58 Energy Manager 1.3 - Instruction Manual
6 Decommissioning
6.1 How to Decommission the Energy Manager
The decommissioning of Energy Manager is composed of the following
steps:

Shut down the Energy Manager. See How to Shut Down Energy
Manager on page 62.
 Disconnect the Energy Manager from the – 48 V
DC
network.
 Check that connections are voltage-free and ensure that they are
not turned on again.
 Remove all electrical connections from and to the Energy
Manager.

Disassemble all sensors and actuators.
TIP
Return Energy Manager devices and equipment parts no longer needed to
Heliocentris Industry GmbH for disposal. Dispose of packaging material
that is no longer needed in accordance with the local laws and regulations.
6.1.1 How to Disconnect the Energy Manager
NOTICE
Danger of data loss!
Improper shut down of the Energy Manager can destroy the flash
disk module.

Wait until the software of the Energy Manager are shut down
before disconnecting the power cable.
1. Shut down Energy Manager. See How to Shut Down Energy Manager
on page 62.
2. Disconnect power supply.

A message on the display indicates when the power supply can be
disconnected.
3. Check that connections are voltage-free.
4. Disconnect all connection from wiring board.
5. Remove SIM card.

Energy Manager is disconnected and can be removed from the
rack.