Heliocentris Energy Manager 1.3, Instruction Manual

Page: 38 / 78

Operating
38 Energy Manager 1.3 - Instruction Manual
Menu item Display Description I/C
Start relay* One of the
commands:
Commands to be entered by a
user.
Start relay on Switch on generator manually I+C*
Start relay off Switch off generator manually I+C*
Load relay One of the
commands:
Commands can only be executed
if unit is in test mode.
Load relay on Switch on generator manually. I+C
Load relay off Switch on generator manually. I+C
Consum x.xx l Diesel consumption in liter per
hour
I
t_on x.xx h Operating hours of generator I
Battery xx.x V Voltage of starter battery I
t_serv x.xx h Genset runtime since last service I
Oil
management Returns one of
the operating
modes: Operating status of oil
management I
not configured Oil management is not
configured.
I
active Oil management is running. I
monitored Oil management is monitored. I
failure Oil management is in error
status.
I
Reset counters* Reset of operating counters
excepted t_serv
C*
Reset t service* Reset genset service interval
counter C*
Error list Number in
hexadecimal
format All active events are displayed
one after another with their
number and a short text, and can
be confirmed. I+C
Legend:
* Item is only displayed if the access level is service
I/C Information/Command
Table 5-3 Genset submenu