Heliocentris Energy Manager 1.3 Instruction Manual Download Page 33

Page: 33 / 78

Operating

Energy Manager 1.3 - Instruction Manual

Operating

This chapter describes how to operate the Energy Manager via the control

panel. For operation via Live Access Application, see LAA manual.

5.1

LCD Menu Structure

Configuration changes and adjustments can be entered directly at the

Energy Manager via the LCD menu.
The available items in the main menu as in the submenus depend on the

customized system configuration and can differ from the items listed in this

chapter.
For information on operating of the control panel, see

How to Use the

Control Panel

on page 25.

5.1.1

Main Menu

The main menu comprises all modules which are installed and controlled

by the Energy Manager plus a login function for the technical service. The

items of the main menu lead to submenus for the selected modules.
Behind each item of the main menu, the current operating mode or an

import event is displayed. Possible operating modes for each module are

described in the following chapters.

TIP

Modules not implemented are not displayed in the main menu.

The following table comprises all modules which may be implemented. It

does not necessarily and entirely correspond to your installed solution.

Main menu

Description

System (Sys)

General Energy Manager System. Status data of the
EM and the network can be accessed. Behind the

item either an event code or the operating mode is
displayed.

Gen

Genset module. Status data concerning the
generation set can be accessed. Behind the item
either an event code or the operating mode is

displayed.

Batt

Battery module. Status data of battery can be
accessed. Behind the item the operating mode is
displayed.

Fuel

Fuel module. Status data of diesel can be accessed.
Behind the item either the filling status in liter or an
event is displayed.

Summary of Contents for Energy Manager 1.3















































































Search results

Summary of Contents for Energy Manager 1.3

Reviews:

Related manuals for Energy Manager 1.3

Brands by name

Popular brands

Heliocentris Energy Manager 1.3, Instruction Manual

Search results

Summary of Contents for Energy Manager 1.3

Reviews:

Related manuals for Energy Manager 1.3

Brands by name

Popular brands