HEIDENHAIN TNC 370 D, Technical Information

Page: 81 / 92

4–78 TNC 370 D Machine Parameters July 02
Function and input Machine
parameter Change via Reaction
MP7480.0
3 = Output of pocket number (W264) and
tool number only when tool number
changes
6 = Output of pocket number (W262) and
tool number (W264) with every TOOL
CALL block. (Fixed tool pocket coding).
Output of tool or pocket number with
TOOL CALL block
Input:
0 = No output
1 = Tool number output only when tool
number changes (W264)
2 = Tool number output with every TOOL
CALL block (W264)
4 = Output of pocket number (W264) and
tool number with every TOOL CALL
block
5 = Output of pocket number (W264) and
tool number only when tool number
changes. Fixed tool pocket coding
PLC
RUN
MP7480.1 Output of tool or pocket number with
TOOL DEF block
Input:
0 = No output
3 = Output of pocket number and tool
number only when tool number
changes
1 = Tool number output only when tool
number changes
2 = Tool number output with every TOOL
DEF block
4 = Output of pocket number and tool
number with every TOOL DEF block
PLC
RUN
MP7490 Number of datums in traverse range
Input: 1 or 3
1 = 3 traverse ranges, 3 datums
3 = 3 traverse ranges, 1 datum