Hawking HWRN1A, User Manual

Page: 99 / 138

90
Here are descriptions of every setup items:
Enable Port Check this box to enable port mapping,
Forwarding (1): and uncheck this box to disable port mapping.
Private IP (2):
Input the IP address of the computer on local
network which provides internet service.
Computer Name (3): Pull down the menu and all the computers
connected to the router will be listed here. You can
easily to select the computer name without checking
the IP address of the computer.
Type (4):
Select the type of connection, TCP or UDP. If you’re
not sure, please select ‘Both’.
Port Range (5):
Input the starting port number in the left field, and
input the ending port number in the right field. If
you only want to redirect a single port number, just
fill the port number in the left field.
Comment (6):
Please input any text to describe this mapping, up to
16 alphanumerical characters.
Add (7):
Add the mapping to port forwarding table.
Reset (8):
Remove all inputted values.
Port Forwarding
All existing port forwarding mappings will
Table (9): be displayed here.
Delete
Please select a port forwarding mapping by
Selected (10): clicking the ‘Select’ box of the mapping, then click
‘Delete Selected’ button to remove the mapping. If
there’s no existing mapping, this button will be
grayed out.
Delete All (11):
Delete all mappings existed in virtual server table.