Hawking HWRN1A, User Manual

Page: 45 / 138

36
Here are descriptions of every setup item:
Host Address (1): Input the IP address of the remote host you wish to
initiate a management access.
Port (2):
You can define the port number this router should
expect an incoming request. If you’re providing a
web service (default port number is 80), you should
try to use other port number. You can use the default
port setting ‘8080’, or something like ‘32245’ or
‘1429’. (Any integer between 1 and 65534)
Enabled (3):
Select the field to start the configuration.
When you finish with all settings, click ‘Apply’, and you’ll see the
following message displayed on web browser:
Press ‘Continue’ to save the settings made and go back to web
management interface; press ‘Apply’ to save the settings made and restart
the router so the settings will take effect after it reboots.