Hawking HWRN1A User Manual Download Page 138

Page: 138 / 138

129

transmission over the Internet. Both TCP and UDP are transport layer protocol. TCP

performs proper error detection and error recovery, and thus is reliable. UDP on the

other hand is not reliable. They both run on top of the IP (Internet Protocol), a

network layer protocol.

WAN:

Wide Area Network. A network that connects computers located in

geographically separate areas (e.g. different buildings, cities, countries). The Internet

is a wide area network.

Web-based management Graphical User Interface (GUI):

Many devices support a

graphical user interface that is based on the web browser. This means the user can use

the familiar Netscape or Microsoft Internet Explorer to Control/configure or monitor

the device being managed.

Summary of Contents for HWRN1A











































































































































Search results

Summary of Contents for HWRN1A

Reviews:

Related manuals for HWRN1A

Brands by name

Popular brands

Hawking HWRN1A, User Manual

Search results

Summary of Contents for HWRN1A

Reviews:

Related manuals for HWRN1A

Brands by name

Popular brands