Hawking HWRN1A, User Manual

Page: 71 / 138

62
Here are descriptions of every setup items:
Band (2) Select the band you want to use, two wireless
routers must use the same setting.
Channel
Select the channel you want to use, two wireless
Number (3) routers must use the same setting.
MAC
address (4)
Input the MAC address of another wireless router.
Set
Click to set security settings for this connection
Security (5) (Please go to section ‘2-7-3 Wireless Security’
for detailed instructions).
2-7-1-4 Setup procedure for ‘AP Bridge-Point to Multi-Point’:
In this mode, you can connect your wireless router with at least four
wireless routers to expand the scope of wireless network, and all clients
(wired only – AP will not accept wireless clients in this mode) of the
wireless routers will think they’re on the same physical network.
1
2
3
4
5
6
7
8