Hawking HWRN1A, User Manual

Page: 72 / 138

63
Here are descriptions of every setup items:
Band (2)
Select the band you want to use, all the wireless
routers must use the same setting.
Channel
Select the channel you want to use, all the wireless
Number (3) routers must use the same setting.
MAC address
Input the MAC address of other wireless routers.
1 to 4 (4 - 7)
Set
Click to set security settings for this connection
Security (8) (Please go to section ‘2-7-3 Wireless Security’
for detailed instructions).
2-7-1-5 Setup procedure for ‘AP Bridge – WDS’
In this mode, you can expand the scope of network by combining up to
four other access points together, and every access point can still accept
wireless clients.
NOTE: For WDS mode, the output signal nature is the same as that of
normal AP mode.