51
Please follow the following instructions to set wired LAN parameters:
Please click ‘Local Network’ tab at the top of web management interface,
there are three setup groups here: ‘LAN IP’, ‘DHCP Server’, and ‘Static
DHCP Leases Table’. Here are setup instructions for each of them:
2-6-1 LAN IP section:
Here are descriptions of every setup item:
IP address (1):
Please input the IP address of this router.
Subnet Mask (2):
Please input subnet mask for this network.
802.1d
If you wish to activate 802.1d spanning tree
Spanning Tree (3): function, select ‘Enabled’ for setup item ‘802.1d
Spanning Tree’, or set it to ‘Disabled’
DHCP Server (4):
If you want to activate DHCP server function of this
router, select ‘Enabled’, or set it to ‘Disabled’.
Recommended Value if you don’t know what to fill:
IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
802.1d Spanning Tree: Disabled
DHCP Server: Enabled
1
3
2
4
Summary of Contents for HWRN1A
