Hawking HWRN1A, User Manual

Page: 89 / 138

80
Authentication Mode: The wireless security
authentication mode of this wireless router will be
displayed here. If you don’t enable security function
of the wireless router before WPS is activated, the
router will auto set the security to WPA (AES) and
generate a set passphrase key for WPS connection.
Passphrase Key: The wireless security key of the
router will be displayed here.
Config Mode (3) There are ‘Registrar’ and ‘Enrollee’ modes for the
WPS connection. When ‘Registrar’ is enabled, the
wireless clients will follow the router’s wireless
settings for WPS connection. When ‘Enrolle’ mode
is enabled, the router will follow the wireless
settings of wireless client for WPS connection.
Configure
Click ‘Start PBC’ to start Push-Button style WPS
via Push Button (4) setup procedure. This wireless router will wait for
WPS requests from wireless clients for 2 minutes.
The ‘WLAN’ LED on the wireless router will be
steady on for 2 minutes when this wireless router is
waiting for incoming WPS request.
Configure
Please input the PIN code of the wireless client you
via client wish to connect, and click ‘Start PIN’ button.
PinCode (5) The ‘WLAN’ LED on the wireless router will be
steady on when this wireless router is waiting for
incoming WPS request.