Hartzell HC-D2MV20-3 Series, Owner'S Manual And Logbook

Page: 178 / 204

inspection and check
61-00-40
propeller owner’s Manual
140
Page 5-22
Rev. 2 Jun/12
D. Fire Damage or Heat Damage
WARNING: HUBS AND CLAMPS ARE
MANUFACTURED FROM HEAT TREATED
FORGINGS AND ARE SHOT PEENED.
BLADES ARE MANUFACTURED
FROM HEAT TREATED FORGINGS
AND ARE COMPRESSIVELY ROLLED
AND SOMETIMES SHOT PEENED.
EXPOSURE TO HIGH TEMPERATURES
CAN DESTROY THE FATIGUE BENEFITS
OBTAINED FROM THESE PROCESSES.
On rare occasions propellers may be exposed to fire or heat
damage, such as an engine or hanger fire. In the event of
such an incident, an inspection by an appropriately licensed
propeller repair station is required before further flight.
6. Long Term Storage
A. Parts shipped from the Hartzell Propeller Inc. factory are not
shipped or packaged in a container that is designed for long
term storage.
B. Long term storage procedures may be obtained by
contacting a Hartzell Propeller Inc. distributor, or the Hartzell
Propeller Inc. factory via the product support number listed in
the Introduction chapter of this manual. Storage information
is also detailed in Hartzell Propeller Inc. Manual 202A
(61-01-02).
C. Information regarding the return of a propeller assembly
to service after long term storage may be obtained by
contacting a Hartzell Propeller Inc. distributor, or the Hartzell
Propeller Inc. factory via the product support number listed
in the Introduction chapter of this manual. This information is
also detailed in Hartzell Propeller Inc. Manual 202A
(61-01-02).