Hartzell HC-D2MV20-3 Series, Owner'S Manual And Logbook

Page: 80 / 204

Propeller Owner’s Manual
140
INSTALLATION AND REMOVAL
61-00-40
Page 3-16
Rev. 1 May/11
Reversing Control must
pull the short end of the
valve lever tight against
the bracket
Valve Lever
Bracket
Aps5098
(4) Reverse Pitch Hardware Adjustment
CAUTION: REVERSING CONTROL MUST PULL
THE SHORT END OF THE VALVE
LEVER TIGHT AGAINST THE BRACKET.
REFER TO FIGURE 3-3.
(a) Adjust the lever
1 Loosen the clamp that holds the push-pull reverse
control housing.
2 Install the housing away from the propeller until
the lever is hard against the bracket.
Reverse Pitch Hardware Adjustment
Figure 3-3