Propeller Owner’s Manual
140
INSTALLATION AND REMOVAL
61-00-40
Page 3-3
Rev. 2 Jun/12
1. Tools, Consumables, and Expendables
The following tools, consumables, and expendables will be
required for propeller removal or installation:
NOTE: The steel hub reciprocating propellers covered in this
manual are manufactured to install on an SAE Number
20 Spline engine shaft. The spline type is indicated in
the propeller model identification number stamped on
the hub. For example, HC-D3MV
20
-6L indicates an
SAE 20 spline.
A. Tooling
20 Spline
• Safety wire pliers
• Torque wrench
• Torque wrench adapter (Hartzell Propeller Inc.
P/N BST-2910)
B. Consumables
• Quick Dry Stoddard Solvent or Methyl-Ethyl-Keytone (MEK)
C. Expendables
• 0.032 inch (0.813 mm) Stainless Steel Aircraft Safety Wire
• O-ring, cylinder-to-stud seal (Table 3-1).
Summary of Contents for HC-D2MV20-3 Series
Page 6: ...Propeller Owner s Manual 140 Page 4 Nov 02 61 00 40 MESSAGE This page is intentionally blank...
Page 202: ...Page 8 2 Nov 02 RECORDS61 00 40 Propeller Owner s Manual 140 This page is intentionally blank...
Page 204: ...Page 8 4 Nov 02 RECORDS61 00 40 Propeller Owner s Manual 140 This page is intentionally blank...