12/24/07
888-2685-001
3-7
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation and Adjustments
Ranger Commissioning Manual
3.6
Power Amp Main Menu
If you press the Power Amp button on the control panel
overlay, or the Power Amp button on the HOME screen,
it will take you to the screen shown in Figure 3-6. The
Power Amp Menu Tree is shown in Figure 3-32 on page
3-33.
Figure 3-6 Power Amplifier Screen
This screen shows the Forward and Reflected power for the PA Modules and the total
output power before the mask filter. Each of the amplifier select buttons in the middle of
the screen are for navigation to the PA Faults screen. These buttons are also status
indicators with 3 different modes:
Button showing PA Module has been turned OFF.
Button showing PA Module #2 has a Fault. Press the button to go to PA Faults.
Button showing PA Module 2 ON with no faults.
Button showing PA Module removed from transmitter.
To Figure 3-7
To Figure 3-8
To PA Faults screen,
Figure 3-7
To Figure 3-10
To Figure 3-3
Module 2 button
will be grayed out
for CZ500F.
NOTE:
Summary of Contents for Ranger Series
