Harris Ranger Series, Commissioning Manual

Page: 60 / 162

3-4 888-2685-001 12/24/07
WARNING: Disconnect primary power prior to servicing.
Ranger Commissioning Manual
Section 3 Operation and Adjustments
3.4 GUI Home Page
The HOME screen shown in Figure 3-3 is the primary operator screen and the default
screen after boot up. The HOME screen contains the most important general operator
information such as:
a.
System Forward and Reflected power
b.
Drive chain status and power level
c.
Individual Power Amplifier PA Module status and power level
d.
AC line voltage and PA power supply voltage.
Figure 3-3 Home Screen
It also has the global status and operation information at the top of the screen which
shows the transmitter status and if there are any faults present.
The HOME button is a software button located in the lower right-hand
corner of all 5 main menu screens for quick navigation to the HOME screen
in Figure 3-3. This screen can only be accessed using the software buttons
on the touchscreen (there is no hardware HOME button). The quickest way to access
the HOME screen is to press any of the 5 hardware buttons to the right of the display as
there is a HOME button on each of those main menu screens.
There are always five touchscreen navigation buttons on the right side of the display.
These are different on almost every screen and, with the exception of the HOME screen,
do not relate to the hardware buttons on the front panel just to the right of the display.
To Figure 3-4 on page 3-5
To Figure 3-6 on page 3-7
To Figure 3-12 on page 3-15
To Figure 3-16 on page 3-21
To Figure 3-18 on page 3-23