4-42
888-2685-001
12/24/07
WARNING: Disconnect primary power prior to servicing.
Ranger Commissioning Manual
Section 4 RF Testing
c.
Connect an RF cable from the 10MHz monitor port of the exciter under test to the
FSQ rear port labeled ”REF IN 1…20MHz”.
d.
Connect an Ethernet crossover cable between the LAN interface on the rear of the
FSQ and the Linux laptop.
e.
Connect an RF cable from the filter assembly desired measurement port to the
FSQ front port labeled “RF INPUT”.
NOTE:
The power level into the FSQ should be -27dBm ± 1dBm. Measure the input feed
power level with a power meter and adjust the level with attenuators as needed to
get as close as possible to -27dBm.
Summary of Contents for Ranger Series
