Revision A • 6/06
H
A
R
R
I
S
C
O
R
P
O
R
A T
I
O
N
6-5
6 Accessories
Quad Meter Kit
The standard NetWave console display has two
stereo bargraph meters to simultaneously display
PGM 1 and another bus or external signal selected
by the Meter selector buttons on the Monitor Panel.
On the NetWave-16 and NetWave-24 consoles,
two additional meters, in a Quad meter kit, can be
added to simultaneously display PGM 1, PGM 2,
PGM 3 and the Monitor Panel selected source.
The 99-1990-16Q kit is for the NetWave-16 and
99-1990-24Q kit is for the NetWave-24.
Link Activation Kit
To fully integrate the NetWave console into a
VistaMax audio management system requires that
the Link Activation kit be installed. The kit con-
sists of a Link Activation PROM for the Monitor
& Output board along with a PROM removal tool
and installation instructions.
When installed, the kit activates the VistaMax
Link connection on the rear panel of the console
so that signals can be routed to and from the con-
sole and an Envoy or VistaMax card frame.
The Harris part number for the Link Activa-
tion kit is 99-1425.
Dual Router Kit
On NetWave consoles that have had a Link Ac-
tivation kit installed, any channel’s A or B input
can be setup to receive a network signal in lieu of
the locally connected signal. Which network source
is assigned to that channel can be done through a
session or macro file run on the parent card frame,
or by using a VistaMax edge device (harware
source selector or soft panel) to select the source.
Local, console channel source selection, can be
added to any pair of fader channels on a NetWave
by installing a Dual Router kit.
The Dual Router kit effectively adds a dual
source selector to the channels that is specifically
setup to control the routed signals for those two
channels. If desired, multiple Dual Router kits can
be installed in a console for maximum signal
source selection flexibility.
The Harris part number for a Dual Router kit
is 99-1424.
Logic Wiring
To assist in logic cable design and construction,
Harris’ Technical Services Department can
supply logic wiring diagrams for many popular
peripheral devices.
To assist in installation, Harris also offers pre-
made peripheral logic cables for many popular
devices. For availability and pricing, contact a sales
representative.
NetWave Toolkit
Because NetWave consoles typically are used
in conjunction with BMX
digital or RMXdigital
consoles, and to keep the price of the console at a
minimum, no tools are supplied standard with the
console.
The tools typically required to isntall or service
the console are included in the optional NetWave
Tool Kit (Harris part number is 76-1901). The kit
contains a ratcheting AMP MOD IV crimp tool,
an AMP MOD IV extraction tool, a 2mm hex
driver for the fader and panel hex screws, and a
Harris logo pouch to hold the tools. Only one tool-
kit is required per facility, regardless of the num-
ber of consoles.
