Revision A • 6/06
H
A
R
R
I
S
C
O
R
P
O
R
A T
I
O
N
3-13
3 Using NetWave
When the caller then goes live on-air (the Telco
channel is on), the foldback automatically switches
to PGM 1 (assuming the air feed is the Program 1
bus) so that the caller hears everything else going
out on-air minus their own voice.
Auto Foldback Off
(default operation)
When Auto Foldback is off, the Telco channel
has a different bus priority order for selecting the
foldback feed.
When the Channel is On or Off, the primary
foldback source is Offline. If it is not assigned, then
the program buses are used in this order: PGM 1,
PGM 2, PGM 3, PGM 4.
Auto Foldback Off is the most common setting
for recording callers for later broadcast or for a
live remote where a “broadcast” feed to the remote
site is required.
In a remote broadcast, when the remote talent
channel goes from off-air to on-air, the foldback
mix should not change. In this case, select only
PGM 1 on the Telco channel and the PGM 1
foldback will always be sent to the remote, regard-
less of whether the channel is on or off. If a special
remote broadcast mix is required, construct it us-
ing the Offline bus and it will be the foldback feed,
regardless of the program bus assignments and
whether the channel is on or off.
TELCO RECORD OUTPUT
A two-channel Telco Record output, with the
caller on the left channel and the talent (mix-mi-
nus bus) on the right channel, is available for use
with phone call editors like the VoxPro®.
The console does not have a dedicated local Telco
Record output, but the Program 4 analog output
can alternately be assigned as the Telco Record
output. Linked consoles have the stereo Telco
Record output as one of their network signals.
The Record Summary list, above right, lists
which signals get recorded, but since the Telco
TEL 1 TEL 2
Record Mix
Bus assignment
(priority is Offline,
then PGM 1, PGM 2,
PGM 3 and PGM 4)
Offline button
winks (lit/dims/lit)
to indicate the
record bus
assignment
Channel on/off
status does not
affect the Telco
Record Output
when Auto
Foldback is off.
PGM 1 blinks
(lit/off/lit) to
indicate it is
NOT being
recorded since
it is not assigned
to the record bus
(the Offline bus)
TELCO RECORD OUTPUT EXAMPLE
(with Auto Foldback set to off )
Telco 1 Telco 2
record mix bus is affected by whether Auto
Foldback is active or not, here is a more detailed
listing of how the Telco Record output is affect by
the two Auto Foldback mode settings.
Auto Foldback is off (the default setting):
The record mix bus is Offline. If it is not as-
signed, then the program buses are used in order;
PGM 1, PGM 2, PGM 3, PGM 4.
If Offline is the record mix source, then it doesn’t
matter whether the channels are on or off. If they
are assigned to the Offline bus then they will be
recorded onto the right channel.
LEFT
CHANNEL
RIGHT
CHANNEL
NOT
RECORDED
Either, or both, Telco channels
assigned to the record mix bus
All non-Telco channels assigned to the
record mix bus
Any channel NOT assigned to the
record mix bus
TELCO RECORD OUTPUT SUMMARY
