Revision A • 6/06
H
A
R
R
I
S
C
O
R
P
O
R
A
T
I
O
N
4-6
4 Linking the NetWave
sole) and; given a unique device IP address.
This information should have been written
on the TINI card’s antistatic package label
when the TINI was installed into the Dual
Fader panel.
Once this information is entered into VMCC,
right click on the TINI’s name in the Ex-
plorer pane to pop up the
Convert to Dual
Router selection box to define the device as
a Dual Router panel. The TINI’s icon will
automatically move under the parent device
and be selected (if not, expand the parent
device, then click on the Dual Router TINI
to open up the device pane).
The Parent Device selection box will again
be empty, so click the down arrow to select
which NetWave console the panel is installed
in (in the example, NetWave_16). Assign each
of the Dual Router TINI cards in like man-
ner.
Once all TINIs are redefined as Dual Router
panels, in order to have them now appear
under their own consoles (instead of under
the consoles’ parent devices) requires that the
VMCC community be reopened. Select
File,
then
Open Community and select the
community’s name. The result is shown
above, right.
The TINI cards appear under the NetWave
consoles in the
Dual Routers branch. The TINI
cards can now be “bound” to the two Dual
Fader channels that each TINI controls. First,
click on a Fader to open up its Binding Pane,
then click on the down arrow in the
Bind to
Fader entry box to show which TINI cards
are available to be bound to those two chan-
nels. In the above example, only TINIs
CH_3_4 and CH_5_6 can be selected since
CH_1_2 has already been bound to Faders 1
& 2. Since
Faders 5 & 6 are selected, high-
lighting CH_5_6 selects that TINI to bind to
those two channels.
6 Setup the Dual Router Parameters
Once a TINI is bound to a pair of channels,
the Sources and Macros entry boxes are popu-
lated with the VistaMax devices and their
sources that are available to the NetWave
console’s parent device. From these lists of
signals, only those sources and macros that
are typically selected for each channel should
Setting the TINI’s Parent Device in VMCC
Binding the TINI cards to a Dual Fader Panel
Setting the Sources Available for each Dual Router
