HappyJapan HCH Plus Instruction Book Download Page 155

Page: 155 / 355

-D2 -94

1. When the machine is stopped, press

2. Select "SETTING" and select

(Frame

out).

3. Select

4. Move the frame to the frame out position.

Setting is cancelled.

5. Press
.

The setting is fixed.

PATTERN SETTINGS

12_F NB01

Teaching input

Move the frame and the position will be saved

as the frame out.

: Frame out point

●

: Original point (Start point of pattern)

: Last position of Color change number

Lengthwise

move

distance

Sidewise move

distance

Frame out

The pattern data may be shown.

Setting is returned to the default.

To return to Menu mode.

to return to Drive mode.

Summary of Contents for HCH Plus




































































































































































































































































































































































Search results

Summary of Contents for HCH Plus

Reviews:

Related manuals for HCH Plus

Brands by name

Popular brands

HappyJapan HCH Plus, Instruction Book

Search results

Summary of Contents for HCH Plus

Reviews:

Related manuals for HCH Plus

Brands by name

Popular brands